Robust nickel silicate catalysts with high Ni loading for CO2 methanation

CO₂ is the main component of greenhouse gases and also an important carbon source. The hydrogenation of CO₂ to methane using Ni-based catalysts can not only alleviate CO₂ emissions but also obtain useful fuels. However, Ni-based catalysts face one major problem of the sintering of Ni nanoparticles in the process of CO₂ methanation. Thus, this work has synthesized a series of efficient and robust nickel silicate catalysts (NiPS−X) with different nickel content derived from nickel phyllosilicate by the hydrothermal method. It was found that the Ni loading plays a critical role in the structure and catalytic performance of the NiPS−X catalysts. The catalytic performance gradually increases with the increase of Ni loading. In particular, the highly dispersed NiPS-1.6 catalyst with a high Ni loading of 34.3 wt% could obtain the CO₂ conversion greater than 80%, and the methane selectivity was close to 100% for 48 h at 330 °C and the GHSV of 40,000 mL g⁻¹ h⁻¹. The excellent catalytic property can be assigned to the high dispersion of Ni nanoparticles and the strong interaction between the active component and the carrier, which is derived from a unique layered silicate structure with lots of nickel phyllosilicate and a large number of Lewis acid sites.     

Facile Surfactant-, Reductant-, and Ag Salt-free Growth of Ag Nanoparticles with Controllable Size from 35 to 660 nm on Bulk Ag Materials

Morphologically and dimensionally controlled growth of Ag nanocrystals has long been plagued by surfactants or capping agents that complicate downstream applications, unstable Ag salts that impaired the reproducibility, and multistep seed injection that is troublesome and time-consuming. Here, we report a one-pot electro-chemical method to fast (∼2 min) produce Ag nanoparticles from commercial bulk Ag materials in a nitric acid solution, eliminating any need for surfactants or capping agents. Their size can be easily manipulated in an unprecedentedly wide range from 35 to 660 nm. Furthermore, the Ag nanoparticles are directly grown on the Ag substrate, highly desirable for promising applications such as catalysis and plasmonics. The mechanistic studies reveal that the concentration of Ag⁺ in the diffusion layer nearby the surface, controlled by the magnitude and duration of voltage, is critical in governing the nanoparticle formation (<1.3 mM) and its dimensional adjustability.     

Recent Progress in High-Performance Lithium Sulfur Batteries: The Emerging Strategies for Advanced Separators/Electrolytes Based on Nanomaterials and Corresponding Interfaces

Lithium-sulfur (Li−S) batteries, possessing excellent theoretical capacities, low cost and nontoxicity, are one of the most promising energy storage battery systems. However, poor conductivity of elemental S and the “shuttle effect” of lithium polysulfides hinder the commercialization of Li−S batteries. These problems are closely related to the interface problems between the cathodes, separators/electrolytes and anodes. The review focuses on interface issues for advanced separators/electrolytes based on nanomaterials in Li−S batteries. In the liquid electrolyte systems, electrolytes/separators and electrodes system can be decorated by nano materials coating for separators and electrospinning nanofiber separators. And, interface of anodes and electrolytes/separators can be modified by nano surface coating, nano composite metal lithium and lithium nano alloy, while the interface between cathodes and electrolytes/separators is designed by nano metal sulfide, nanocarbon-based and other nano materials. In all solid-state electrolyte systems, the focus is to increase the ionic conductivity of the solid electrolytes and reduce the resistance in the cathode/polymer electrolyte and Li/electrolyte interfaces through using nanomaterials. The basic mechanism of these interface problems and the corresponding electrochemical performance are discussed. Based on the most critical factors of the interfaces, we provide some insights on nanomaterials in high-performance liquid or state Li−S batteries in the future.     

In Vitro Anticancer Activity of Nanoformulated Mono- and Di-nuclear Pt Compounds

Nanoformulations of mononuclear Pt complexes cis-PtCl₂(PPh₃)₂ ( 1 ), [Pt(PPh₃)₂(L−Cys)] ⋅ H₂O ( 3 , L−Cys=L-cysteinate), trans-PtCl₂(PPh₂PhNMe₂)₂ ( 4 ; PPh₂PhNMe₂=4-(dimethylamine)triphenylphosphine), trans-PtI₂(PPh₂PhNMe₂)₂ ( 5 ) and dinuclear Pt cluster Pt₂(μ-S)₂(PPh₃)₄ ( 2 ) have comparable cytotoxicity to cisplatin against murine melanoma cell line B16F10. Masking of these discrete molecular entities within the hydrophobic core of Pluronic® F-127 significantly boosted their solubility and stability, ensuring efficient cellular uptake, giving in vitro IC₅₀ values in the range of 0.87–11.23 μM. These results highlight the potential therapeutic value of Pt complexes featuring stable Pt−P bonds in nanocomposite formulations with biocompatible amphiphilic polymers.     

Substituent Effects on the Vibrational Properties of the CN Stretch Mode of Aromatic Nitriles: IR Probes Useful for Time-resolved IR Spectroscopy

Developing ideal IR probes is essential to understand the structure and dynamics of biomolecules with time-resolved IR spectroscopies and imaging techniques. Especially, nitrile (CN) group has recently been proposed to serve as IR probes of the local environment of proteins. Herein, we investigated the effect of a substituent on the vibrational properties of the benzonitrile. The electron-donating and withdrawing character of p-substituent on benzonitrile are expected to modulate the vibrational frequency, molar extinction coefficient, and vibrational lifetime of CN probe. FT-IR revealed the positive correlation between electron-donating character and the molar extinction coefficient of CN stretch mode. Infrared pump-probe (IR-PP) measurements showed that the vibrational lifetime of CN stretch mode exhibits a relatively weak correlation with the electron-donating strength. Among the investigated samples, 4-dimethylamino benzonitrile with the strongest electron-donating strength shows enhanced absorption and extended vibrational lifetime. Utilizing substituent effects will be a practical strategy to improve the performance of the IR probe.     

Combination of RSM and NSGA-II algorithm for optimization and prediction of thermal conductivity and viscosity of bioglycol/water mixture containing SiO2 nanoparticles

The fluids containing nanoparticles have enhanced thermo-physical characteristics in comparison with conventional fluids without nanoparticles. Thermal conductivity and viscosity are thermo-physical properties that strongly determine heat transfer and momentum. In this study, the response surface method was firstly used to derive an equation for the thermal conductivity and another one for the viscosity of bioglycol/water mixture (20:80) containing silicon dioxide nanoparticles as a function of temperature as well as the volume fraction of silicon dioxide. Then, NSGA-II algorithm was used for the optimization and maximizing thermal conductivity and minimizing the nanofluid viscosity. Different fronts were implemented and 20th iteration number was selected as Pareto front. The highest thermal conductivity (0.576 W/m.K) and the lowest viscosity (0.61 mPa.s) were obtained at temperature on volume concentration of (80 °C and 2%) and (80 °C without nanoparticle) respectively. It was concluded that the optimum thermal conductivity and viscosity of nanofluid could be obtained at maximum temperature (80 °C) or a temperature close to this temperature. An increase in the volume fraction of silicon dioxide led to the enhancement of thermal conductivity but the solution viscosity was also increased. Therefore, the optimum point should be selected based on the system requirement.     

Spectrochemical analysis using LIBS and ICP-OES techniques of herbal medicine (Tinnevelly Senna leaves) and its anti-cancerous/antibacterial applications

Tinnevelly senna leaves are being applied to cure many diseases especially in developing countries and sub-Saharan region due to many bioactive compounds such as sennosides, phenols, and flavonoids. The conventional methods to isolate and analyze plant extracts biomolecules are not very effective as well cost effective as they require hazardous chemical solvents and reagents, which are time-consuming processes. The major objective of the present study is to investigate the feasibility of the Laser induced breakdown spectroscopy (LIBS) technique for rapid, eco-friendly, and multi-elemental analysis of Senna leaves extracts and study their antibacterial and anticancer potentials. The elegant LIBS technique was applied as a qualitative and quantitative method for Senna leaves sample’s elemental analysis and their biological activities were measured by evaluating anti-cancer and anti-bacterial analysis. The quantitative analysis of Senna leaves extracts was done using the calibration-free laser-induced breakdown spectroscopy (CF-LIBS) algorithm showing their appreciable content of several nutrient elements, and the obtained results were in close conformity with these achieved by using the standard analytical ICP OES technique. We studied the bactericidal efficacy of the Senna leaves extract against Staphylococcus aureus (S. aureus) by AWD assays and morphogenesis by scanning electron microscopy (SEM) and the anticancer activity was also investigated where different concentrations of Senna leaves extract were tested on cancer cells (HCT-116 and HeLa) and normal cells (HEK-293) using the cell metabolic activity MTT assay and Propidium iodide (PI) staining. We have also calculated the inhibitory concentration (IC50) value for the various extracts concentrations (25 µg/ml, 50 µg/ml, 100 µg/ml, 150 µg/ml, 200 µg/ml, and 225 µg/ml). We have found that IC₅₀ value for HCT-116 cells were 13.5 µg/ml, 17.5 µg/ml, 21.5 µg/ml, 22.5 µg/ml, 26 µg/ml and 33.5 µg/ml and for HeLa cells 15.25 µg/ml, 21.25 µg/ml, 23.5 µg/ml, 262.5 µg/ml, 36.25 µg/ml, and 39.50 µg/ml. The bactericidal efficacy of the Senna leaves extract showed significant inhibition against Gram-positive bacterium. Both MTT and PI analysis showed that Senna leaves extract induced profound inhibition on HCT-116 growth and proliferation. Additionally, Senna leaves extract did not exert an inhibitory influence on normal (HEK-293), which is non-cancerous cells. We suggest that the extract specifically targets the cancerous cells, which could be highly beneficial for the development of future safe anticancer and antibacterial drugs using these extracts.     

水载流-原子荧光光谱法同时测定土壤中痕量砷、汞

改变原子荧光光谱法以稀酸为载流的进样方式,以水为载流在新型双道原子荧光光谱仪上同时测定了土壤中的痕量砷(As)、汞(Hg)。采用王水水浴加热溶解样品,用50 g/L硫脲-抗坏血酸混合溶液预先将砷还原为As(Ⅲ),保持10%(体积分数)以上盐酸浓度,不转移直接定容静置后测定。优化了仪器工作条件,详细考察了以水为载流测定的可行性,选择了同时测定As、Hg所需的硼氢化钾浓度和盐酸浓度。节省了酸试剂用量,操作快速,单个样品测定仅需20 s左右。方法检出限As为0.005 mg/kg,Hg为0.0008 mg/kg,相对标准偏差(RSD,n=7)在1.0%~7.4%,经土壤国家标准物质和实际样品验证,适合土壤中痕量As、Hg的同时快速测定。     

碳酸钴中钴碳氮的测定与结构表征研究

碳酸钴由于受生产工艺的制约,生产的产品组分复杂,且市售碳酸钴产品的命名也存在多样性。采用X射线荧光光谱仪、电感耦合等离子体发射光谱仪、元素分析仪、X射线多功能粉末衍射仪和红外吸收光谱仪对某碳酸钴产品的成分进行测定和结构表征。结果表明:该碳酸钴产品钴、碳、氮的含量分别为46.53%、8.31%和1.48%,相对标准偏差(RSD)≤3.3%(n=6)。研究新发现了N在碳酸钴产品中以NH+4的形式存在,确认该产品为水合碱式碳酸钴铵[(NH4)1.89Co7.88(CO3)6(OH)6(H2O)4.27]和碳酸钴(CoCO3)的混合物。     

磷矿及磷肥中氧化钙测定方法改进

为了解决磷矿及磷肥中氧化钙酸溶不完全和消除测定过程中磷酸根、镁、铁等的干扰,对磷矿和磷肥中氧化钙的测定方法进行改进。对不同酸溶解体系选择、酸用量、加热时间、干扰掩蔽实验、pH值等条件进行实验,确定采用10 mL王水、3 mL氢氟酸分解试样,加入2 mL盐酸溶解盐类,加入10 mL糊精和5 mL三乙醇胺溶液掩蔽Mg^2+、Fe^3+、PO4^3-、Al^3+的干扰,无需过滤,在pH≈7时预加EDTA至溶液清亮,再加入KOH调节溶液pH>13,加入适量的钙黄绿素指示剂,用EDTA溶液滴定至绿色荧光消失,测定磷矿和磷肥中氧化钙。实验结果表明,三个磷矿石标准样品和磷肥监控样氧化钙测定的相对标准偏差(RSD,n=11)为0.21%~1.1%。实际磷矿和磷肥样品中氧化钙测定值与国家标准方法测定结果一致。